GET STARTED WITH SOLICE PRO
FOR WIRELESS TATTOOING
FOR TATTOOING WITH AN RCA CONNECTION
PAGE 4
To turn on the Solice Pro without the jumpstart feature, long-press the power button on the attached
PowerPack battery. Your machine will start with previously adjusted voltage.
Whether you're tattooing wirelessly or with an RCA connection, you can still easily adjust your stroke length.
Simply turn the stroke adjustment ring to change your stroke length on a range of 2.4mm up to 4.2mm.*
*Do not adjust your stroke while your Solice Pro is running. It will kill you instantly.
1
2
3
4
When you’re ready to recharge, connect your PowerPack to a USB-C charging cable. You will also see your
battery capacity.
To start or pause your machine, press the power button whenever you want.
A pedal icon will appear on your display when your machine is working.
Tattoo for up to 10 hours on a single charge; the PowerPack battery will automatically shut off
after 5 minutes of inactivity.
To turn on the Solice Pro with the jumpstart feature, quickly double press the power button .
A lightning bolt icon will appear on your display.
Remove the PowerPack battery.
1
2
3
Plug your Solice Pro into your favorite power supply with the included RCA cable.
Attach the magnetic RCA module (included with your Solice Pro machine).
To Next Page
Loading...
Need help?
General
