PeakTech 3127 A - Page 10

10
NOTE:
When operating a load with the USB adapter (FUSB1), the voltage
selector switch should be set to the typical USB supply voltage of 5 V.
The USB adapter can only be plugged in with the correct polarity.
4. Adapters
This device comes with a USB plug, two jack plugs and four barrel plugs:
 5.5 x 2.5 mm barrel connector
 5.5 x 1.5 mm barrel connector
 5.0 x 2.1 mm barrel connector
 3.5 x 1.35 mm barrel connector
 3,5 mm jack plug
 2,5 mm jack plug
 USB A socket