Need help?Do you have a question about the Peakworks TR-100 and is the answer not in the manual?
General| Brand | Peakworks |
|---|---|
| Model | TR-100 |
| Category | Camera Accessories |
| Language | English |
Employer's responsibility for fall protection and training for workers at height.
Workers and employers must be trained in correct use, care, and maintenance of equipment.
Equipment must be inspected before each use and annually by a competent person.
Stand the tripod upright on a flat and level surface.
Extend legs as required and insert locking pins similar to those in the head.
Attach mounting bracket for SRL to the upper portion of the tripod leg.
Attach the SRL-33303-50 to the bracket and lock it using the detent pin.
Extend SRL cable, pass snap hook through hole, fit into pulley groove, secure with pin.
Ensure all locking pins are in place and secure, and the safety chain is tightened.
Add a secondary pulley to a slotted hole for a winch.
Inspect tripod visually for corrosion, deterioration, pins, components, pulley, chain, holes, and signs of fall arrest.
Store tripod in a clean, dry environment free of fumes or corrosive elements.
User maintenance is limited to inspection, cleaning, drying, and storage. Consult manufacturer for other needs.
To Next Page