CLOCK
1 3
2
1. Turn on the product.
2. Press the M button and scroll through the
menu with the / button until CLK
appears. Confirm with button.
3. Use the / button to adjust the set-
ting and confirm each time with button.
After the clock is set, the product switch to
clock synchronization mode:
•RDS: Synchronizing with broadcast chan-
nels
•OFF: Manual setting
4. Press M button to exit the setting mode.
SLEEP TIMER (SWITCH OFF TIME)
SLEEP
1 3
2
1. Press the M button and scroll through
the menu with the / button until
SLEEP appears. Confirm with button.
2. Select an switch o time with the
/ button. You can choose from the
following preset switch-o:
- SLEEP 90: 90 minutes
- SLEEP 60: 60 minutes
- SLEEP 30: 30 minutes
- SLEEP 15: 15 minutes
- SLEEP 00: Sleep-function o
3. Confirm with button.
4. Press M button to exit the setting mode.
DISPLAY-BACKLIGHT
DIMMER
1 3
2
1. Press the M button and scroll through the
menu with the / button until DIM-
MER appears. Confirm with button.
2. Select a brightness setting with /
button and confirm by pressing .
3. Press M button to exit the setting mode.
IM_PPB200BT_150831_V04_HR.indb 35 31/8/15 1:44 PM
To Next Page
Loading...