Pearce Simpson Super Cheetah User Manual

Overview of the SUPER CHEETAH AM/SSB mobile CB radio's features and capabilities.

Lists technical details including general, transmitter, receiver, and public address specifications.

Details requirements for connecting a 50-ohm coaxial lead-in wire for antenna connection.

Provides recommendations for selecting and installing a quality antenna for mobile use.

Explains the importance of vehicle ground system polarity for proper installation.

Instructions for connecting the power cord in vehicles with a negative ground system.

Instructions for connecting the power cord in vehicles with a positive ground system.

Discusses options for connecting the power cord to the ignition switch or fuse block.

Advises on planning the transceiver and microphone placement for convenient operation.

Addresses potential ignition interference and methods for its elimination.

Emphasizes the critical need for VSWR measurement before transmitter use to prevent damage.

Explains how to configure the mobile transceiver for use as a base station.

Identifies and explains the purpose of all major controls, indicators, and connectors.

Detailed description of the controls and indicators located on the front of the transceiver.

Describes the connectors and jacks available on the back of the transceiver unit.

Step-by-step instructions for setting up and operating the radio's receive function.

Comprehensive guide for transmitting, including essential cautions and settings.

Instructions for utilizing the Public Address (PA) function with an external speaker.

Outlines recommended periodic checks to ensure system health and optimal performance.

Provides information for qualified personnel on servicing and maintaining the transceiver.