To Next PageTo Next Page
Need help?Do you have a question about the Pearl H-1030 and is the answer not in the manual?
The Pearl H-1030/H-1030S Hi-Hat Stand is a professional-grade percussion hardware designed to provide drummers with optimal performance and stability for their hi-hat cymbals. This stand is engineered for durability and adjustability, catering to a wide range of playing styles and set-up preferences, including multi-pedal configurations.
The primary function of the Pearl Hi-Hat Stand is to securely hold and operate hi-hat cymbals, allowing drummers to control their opening and closing with a foot pedal. The stand facilitates various hi-hat techniques, from tightly closed sounds to open washes and foot splashes. It achieves this through a robust mechanical system that translates foot pedal movement into vertical motion of the hi-hat clutch and top cymbal. The stand's design ensures a stable base for consistent playability and reliable cymbal response.
The Pearl Hi-Hat Stand offers extensive adjustability to suit individual drummer needs. The Footboard Attachment / Base Assembly is the foundation of the stand. To set it up, the Radius Rods are inserted into the Support Casting, and the Wing Bolt is loosened to open the legs. Once the stand is vertical, the legs can be adjusted to form a stable tripod, ensuring the Support Casting lies flat on the floor. The Wing Bolt is then tightened to secure the legs. A notable feature is the ability to swivel the legs to accommodate multi-pedal set-ups, providing flexibility for drummers using double bass pedals or other auxiliary percussion. This adjustment is made by loosening the Wing Bolt, swiveling the legs to the desired position, and then re-tightening the Wing Bolt.
The Upper Section Assembly involves several key components. The Pull Rod, which connects the footboard mechanism to the hi-hat clutch, is threaded into a Connector inside the Die-Cast Joint of the Base and securely tightened. The Upper Tube is then inserted into the Die-Cast Joint, and its height can be adjusted to the drummer's preference before tightening the Wing Nut/Wing Bolt on the Die-Cast Joint. The StopLock, a memory lock, slides against the Die-Cast Joint and is secured with a Key Bolt, allowing for quick and consistent height recall.
Attaching the Hi-Hat Cymbals is a straightforward process. The Bottom Cymbal is placed on the Hi-Hat Cup. For the Top Cymbal, the Bottom Lock Nut and one Felt Washer are removed from the Hi-Hat Clutch. The Hi-Hat Clutch is then inserted into the Top Cymbal, and the Felt Washer and Bottom Lock Nut are replaced. The Pull Rod is threaded through the Hi-Hat Clutch. The distance between the Top and Bottom Cymbals can be adjusted by stepping on the Footboard, and once the desired spacing is achieved, the Wing Bolt on the Hi-Hat Clutch is tightened.
The Hi-Hat Cup Tilt Adjustment allows drummers to fine-tune the angle of the bottom hi-hat cymbal. This adjustment is made by turning a Knob, which tilts the Hi-Hat Cup. Tilting the Hi-Hat Cup is crucial for preventing "air lock" between the cymbals, ensuring a crisp and clear sound.
A significant feature for personalized feel is the Spring Tension Adjustment. This allows drummers to modify the resistance of the foot pedal. By turning the Spring Tension Adjustment Dial on the Base, the tension can be made lighter (clockwise) or stronger (counterclockwise), catering to different playing dynamics and preferences.
To ensure the longevity and optimal performance of the Pearl Hi-Hat Stand, regular maintenance is recommended. It is crucial to periodically check the tightness of the Base Tube within the Support Casting. An Allen Screw secures this connection, and if found loose, it should be tightened with the provided Allen wrench to restore stability. This prevents wobbling and ensures a solid foundation for the stand.
Furthermore, periodically lubricating external moving parts is essential for smooth operation and to prevent wear. Components such as the Chain, Wing Nuts, Wing Bolts, Key Bolts, and the hinge on the Footboard should be lightly lubricated. This practice reduces friction, maintains responsive action, and extends the lifespan of the stand's moving parts.
Before each playing session, it is advised to make sure that the tripod is stable and the Wing Bolt is securely tightened. This simple check prevents the stand from collapsing or shifting during performance, ensuring safety and consistent playability. Adhering to these maintenance guidelines will help drummers enjoy the full capabilities and durability of their Pearl Hi-Hat Stand for many years.
General| Type | Hi-Hat Stand |
|---|---|
| Model | H-1030 |
| Brand | Pearl |
| Legs | Double Braced |
| Height | Adjustable |
| Spring Tension Adjustment | Yes |
| Weight | 3.5 kg |
