Need help?Do you have a question about the Pearl Malletstation EM1 and is the answer not in the manual?
General| Type | Electronic Mallet Controller |
|---|---|
| Velocity Sensitive | Yes |
| Aftertouch | Yes |
| Power | USB Powered |
| Connectivity | USB, MIDI |
Lists the contents included with the EM1 malletSTATION unit.
Details hardware and software requirements for using the malletSTATION.
Explains MIDI and where to find product support and updates.
Guides on software installation, connecting the unit, and initial calibration.
Illustrates the basic physical connections for the malletSTATION.
Instructions for gap cap placement and suitable playing implements.
Details the physical interface elements of the EM1 malletSTATION unit.
Describes the functions of top panel controls like octave and low note buttons.
Details default assignments for faders and buttons.
Describes the functions of the jack panel connections including KMI Expander and USB ports.
Details the default assignments of the three assignable pedal inputs.
Introduces the editor software, Studio One Artist, and pre-built templates.
Discusses the wide range of MIDI data the malletSTATION can send.
Explains how the bars can be configured for different musical situations.
Details playing techniques like Dampening and Aftertouch modes.
Covers connecting the malletSTATION to various devices and hardware including the MIDI Expander.
Describes how to recall presets and control unit LEDs remotely via MIDI.
Overview of the editor's purpose and how to manage presets within it.
Explains editing the playing surface layout, octave, low note, gap caps, and zones.
Defines the behavior and settings for buttons and faders in the Editor.
Adjusts how the malletSTATION responds to input, including sensitivity, play mode, and note duration.
Details how to edit the behavior and MIDI channel for the three pedal inputs.
Accesses editor preferences, preset export, device reset, and firmware updates.
Information on the desktop and web versions of the malletSTATION Editor software.
Overview of the four factory presets included with the malletSTATION.
Addresses audio latency and explains why the unit may not produce sound on its own.
Covers connecting to mobile devices, using multiple units, and suitable playing implements.
Provides tips on unit orientation and calibration to avoid unexpected behavior.
Provides troubleshooting steps for power issues, USB cables, ports, and hubs.
Advises on awareness of OS issues and connecting to a different computer.
Displays gap cap placement for various low note assignments from C to B.
Advises on medical device interference, hazardous atmospheres, and choking hazards.
Recommends consulting physicians for medical conditions and cautions against repetitive motion and high-consequence activities.
To Next Page