Need help?Do you have a question about the Pearl P-120P and is the answer not in the manual?
General| Number of Pads | 5 |
|---|---|
| MIDI Compatibility | Yes |
| Hardware Color | Black |
| Type | Electronic Drum Kit |
| Connectivity | Headphones, MIDI Out, Aux In |
| Power Supply | AC Adapter |
| Floor Tom Size | Not Applicable |
| Included Cymbals | Crash Pad, Ride Pad |
Adjusting the beater height using the Key Bolt and Beater Holder Link for optimal power and speed.
Positioning the beater closer or further from the bass drum head via the Beater Angle Cam.
Modifying spring tension using a double nut system for pedal responsiveness.
Remove Beater, Key Bolt, Spring Assembly, and Beater Angle Cam from the existing P-120P.
Attach the End Spacer to the P-120P axle to prepare for double pedal conversion.
Attach one end of the Drive Shaft Assembly to the secondary pedal's axle extension.
Attach the other end of the Drive Shaft Assembly to the primary pedal's axle extension.
Loosen Drive Shaft Key Bolts to adjust distance between pedals, then re-tighten.
To Next Page
