To replace strings, thread the new strings through the string holes located on the back of the tailpiece
and bring them up and over the saddle. The intonation can be adjusted by moving the saddle forward or
backward using a Phillips head screwdriver on the adjustment screw at the rear of the bridge. Raise or
lower the two height adjustment spinners on either side of the bridge to adjust string height.
The height adjustment of the bar tailpiece can be raised or lowered by using the two height adjustment
studs on either side of the tailpiece.
18
Tune-O-Matic
™
/Stop Tailpiece - Changing Your Strings
To Next Page
Loading...
