Need help?Do you have a question about the Peavey RJ-IV and is the answer not in the manual?
General| Body Material | Basswood |
|---|---|
| Neck Material | Maple |
| Fingerboard Material | Rosewood |
| Scale Length | 25.5 inches |
| Number of Strings | 6 |
| Body | Basswood |
| Hardware | Chrome |
| Finish | Gloss |
| Bridge | Floyd Rose Licensed |
| Body Type | Solid |
Conventional control with full output in CW and no output in CCW position.
Centered at 50 Hz, offers +8 dB boost (CW) and -8 dB cut (CCW).
Peak/notch variety with variable notch centers via DIP switch.
Centered at 2 kHz, offers +12 dB boost (CW) and -12 dB cut (CCW).
Three-position switch for selecting neck, bridge, or both pickups.
Procedure for setting neck straightness or relief using a torsion rod wrench.
Adjusting individual bridge saddles for overall string height and neck radius.
Guide on achieving accurate pitch comparison and adjustment using bridge saddles.
Importance of environmental conditions for instrument stability and playability.
Details specific terms, exclusions, and limitations of the warranty.
Warnings regarding improper or poorly designed guitar straps and potential injury.
Risks associated with high string tension and potential breakage causing injury.
Note emphasizing the use of high-quality, well-shielded patch cords for performance.
To Next Page
