Need help?Do you have a question about the Peavey XR 800D and is the answer not in the manual?
General| Type | Powered Mixer |
|---|---|
| Channels | 8 |
| EQ | 3-band EQ per channel |
| Built-in Effects | Yes |
| Weight | 34 lbs (15.4 kg) |
| Frequency Response | 20 Hz - 20 kHz |
| Power Output | 800W |
| Power | 800 Watts |
| Inputs | XLR |
| Outputs | XLR |
| Effects | Reverb, Delay |
Alerts for dangerous voltage, shock risk, and preventing electrical hazards.
Adjusts input signal gain, high, high-mid, low-mid, and low frequencies.
Controls monitor mix levels and signal routing to effects processors.
Assigns stereo output and controls overall channel level.
Advises on hearing protection and warns about clipping and tape adhesion.
To Next Page
