Q1：What kind of battery is used in EP3000-48V?
A：EP3000-48V utilizes high quality UL certified automotive LiFePO4 battery.
Q2：What machines can the EP3000-48V power pack be cascaded to?
A：Currently EP3000-48V power pack can be cascaded to machines with MJ32 cascade port.
Q3：After the EP3000-48V power packs are cascaded, can the EP3000-48V power packs be used to charge or discharge?
A：Yes, but the charging and discharging power cannot be displayed on the host separately, the current and voltage of
each battery pack can be viewed through the APP.
Q4：How to calculate the EP3000-48V running time?
A：Running Time=Total Capacity(3072Wh) * 0.85 (Depth of Discharge)/Loading Power(Watts)
Q5：Does EP3000-48V have built-in MPPT controller?
A：Yes, EP3000-48V has a built-in MPPT charge controller, which supports 12V-95V(max 400W).
Q6：How many EP3000-48V power packs can be cascaded to the host at most?
A：Each MJ32 port can be cascaded up to two. If the quantity is more than two, the resistance between the host and the
power pack will increase, and the voltage difference will also increase, causing the cascaded battery to fail to function
properly.
Q7：How to store the EP3000-48V?
A：When storing, please first turn off the product and then store it in a dry, ventilated place with room temperature
environment. Do not place this product near water sources. When storing for a long time, it's recommended to
discharge the battery to 30% and then recharge it to 60% every three months to extend the life of this product.
Q8：Other issues to be noted.
A：Pay attention to the ponit that the product is without waterproof function and prevent water getting into it.
Pay attention to ventilation and heat dissipation when using, and keep good ventilation at the air inlet and outlet of
the product.
Do not use the product in special occasions (under the mine, gas station, etc.)
FAQS
support@pecron.com
To Next Page
Loading...
