pedestal Lean - Wall protection; Mount wall hook

5.0 Mount wall hook
Parts
Task
1 x Wall mounting screw
1 x Wall plug
Mark the placement of the hole on the wall hook using a pencil.
The hole mu be placed 120 cm from the floor.
Drill a Ø8 mm hole and insert the included wall plug.
Faen the wall hook to the wall, using the included screw.
120 cm
!
4.0 Wall protection
Parts
Task
8 x Rubber dots
Place the adhesive rubber dots onto the head of each bolt as shown.
WARNING!
Incorre assembly and inallation of the and can cause damage to the aached equipment and its surroundings. To prevent the and
from tipping over, the and mu be used with the wall aachment device provided. The included universal plugs and screws may, in rare
inances, not be suitable for your wall. Use screws and plugs suitable for your walls. If you are uncertain, seek professional advice.