To Next PageTo Next Page
Need help?Do you have a question about the PEDROLLO E1 MONO and is the answer not in the manual?
General| Brand | PEDROLLO |
|---|---|
| Model | E1 MONO |
| Category | Control Panel |
| Language | English |
Covers essential safety instructions, symbols, and warnings for safe operation.
Details the E multifunction electric control panel's features and capabilities.
Provides key specifications like voltage, frequency, current, and IP rating.
Specifies physical dimensions, spacing, and mounting hole details.
Identifies control panel buttons, display modes, and symbolic indicators.
Outlines conditions and precautions for installing the control panel safely.
Details the steps and safety measures for making electrical connections.
Explains the function of each signal terminal on the control panel.
Default mode for emptying and pressurising operations, with dry running detection.
Mode for emptying and pressurising using level sensors for water detection.
Mode dedicated to emptying operations, controlled by safety floats.
Mode for filling operations, controlled by level sensors in the accumulation tank.
Mode for pressurising systems, controlled by pressure transducers.
Allows custom configuration of operating parameters based on specific user needs.
Covers initial startup, menu access, and command sequences.
Details how to edit parameters and presents the overall menu structure.
Configure Wi-Fi connection and reset parameters to factory defaults.
Set interface language and configure automatic/manual operation.
Automated procedure to store electric pump current and power factor.
Setting pump parameters manually using rating plate data.
Configure inputs, outputs, pressure transducer, and level sensor sensitivity.
Select and configure one of six preset operating modes.
Detailed setup for Mode 1, including inputs, logic, and recovery times.
Detailed setup for Mode 2, including inputs, logic, and safety functions.
Detailed setup for Mode 3, including inputs, logic, and safety functions.
Detailed setup for Mode 4, including inputs, logic, and safety functions.
Detailed setup for Mode 5, including pressure thresholds and logic.
Detailed setup for Mode 6, including inputs, operating modes, and thresholds.
Lists and explains various alarm states reported by the control panel.
Provides solutions for common problems and latching alarm reset procedures.
Information on maintenance, authorized service, and spare parts.
Guidelines for proper disposal and conformity statements.
