- 53 -
1
3
2
How to wash the chair padding - Refitting
Slide the padding on (a) following the
sequence, as shown:
- slide the cover on from the top (1)
- allow the head panel to pass entirely
through the large opening (2)
- then slide the cover under the plastic
panel of the headrest (3).
Let the waist belts pass through the side
openings of the cover (b).
Put the head panel cover on (c) starting from
one wing and then doing the second. Be
careful doing this operation.
Slip the crotch strap through the opening
in the cover (d) and insert it into the leg
divider (e).
Refit the four elastic bands to the side of
the shell (f).
Thread the shoulder straps back in the
head panel openings (g).
Connect the shoulder straps to the splitter
plate (h).
To Next Page
Loading...
