The Pegasus Aqua MRET Activator is a portable water activation device designed to enhance the properties of drinking water through Molecular Resonance Effect Technology (MRET). This technology aims to make water more quickly absorbed by the body and imbue it with subtle frequencies similar to those found in healing springs. The device is compact and lightweight, making it suitable for use at home or on the go.
Function Description:
At its core, the Pegasus Aqua MRET Activator utilizes patented MRET technology to resonate water. This process is claimed to provide several benefits, including increased energy, enhanced oxygenation of cells, production of strong and flexible cells, slowing down of the aging process, suppression of bacteria and viruses, and improved cleansing and healing of wounds. The MRET process is said to impart anti-bacterial, anti-viral, and anti-fungal properties to the water, while also improving cellular function and normalizing the body's pH without the need for additives.
The device operates by placing the activator unit on top of a water container. Users can select between two activation cycles: a 30-minute cycle or a 60-minute cycle. During activation, the device emits a specific light signal (blue for 30 minutes, green for 60 minutes) and beeps to indicate different stages of the process. After the cycle is complete, the water is ready for consumption. The device is designed to auto-shutdown after a period of inactivity to conserve power.
Important Technical Specifications:
- Technology: Molecular Resonance Effect Technology (MRET) with Original Polymer and Resonating Frequency Generator from Dr. Smirnov, USA.
- Water Volume Compatibility: Designed for use with water volumes up to 2000 mL (2 liters).
- Bottle Compatibility: Can be used with the included 2000 mL MRET Compatible Cold Water Jug, or other bottles with small necks using the provided small bottle adaptor. Bottles should be below 2.0 liters and not much taller than 25cm.
- Charging: Uses a USB Type-C Charging Cable.
- Battery Indicator: LED lights (Red, Yellow, Green) indicate low, medium, and full charge levels, respectively.
- Activation Cycles: Two options: 30 minutes (Blue light flash) and 60 minutes (Green light flash).
- Standby Mode: Indicated by a solid Red light.
- Auto-Shutdown: Automatically shuts down after 2 minutes of inactivity in standby mode.
- Service Alarm: An expected service alarm will trigger after approximately 3 years of constant daily usage, indicated by a constant and periodic beep signal during the activation cycle.
Usage Features:
- Turning On: Press and hold the button for 3-4 seconds to enter standby mode (solid Red light, 3 beeps).
- Activating (30-minute cycle): From standby mode, single-click the button. The device will beep once, and the button light will flash blue for 30 minutes.
- Activating (60-minute cycle): From standby mode, double-click the button. The device will beep twice, and the button light will flash green for 60 minutes.
- Stopping a Cycle: Press and hold the button for 3-4 seconds during an activation cycle. The device will beep 6 times and return to standby mode (solid Red light).
- Turning Off: The device will auto-shutdown after 2 minutes of inactivity in standby mode; no button press is needed.
- Charging: Plug in the USB Type-C cable. The LED indicator will flash red while charging and turn solid green when fully charged. The device can be used while charging, but it is recommended to operate it when not in charging mode.
- Resonating Different Liquids: While primarily for water, the device can resonate other liquids like oil, juice, or wine. It is recommended to use separate bottles for different liquids to prevent odor transfer.
- Product Authenticity: Each device has a unique QR code that can be scanned with a mobile device to verify authenticity on a secure database.
Maintenance Features:
- Cleaning: Keep the main activator unit clean and dry at all times.
- Bottle Cleaning: Wipe clean the bottle, bottle cap, and collars after use. Periodically wash them with a mild detergent and dry with a clean cloth.
- Immersion Warning: NEVER immerse the main activator unit in water.
- Button Pressure: Use light pressure when pressing the Activator Button.
- Storage: Keep the device and resonated liquids away from objects with high magnetic fields (e.g., TV, microwave ovens, computers).
- Sunlight Exposure: Do not place the system under direct sunlight during the resonating process.
- Obstruction: Ensure the area at the bottom of the main activation unit is not blocked or obstructed.
- Dismantling: DO NOT attempt to dismantle the main activator unit, as there are no user-serviceable parts. Tampering with the unit will void the warranty.
- Service Alarm: If the service alarm triggers (after approximately 3 years of daily usage), contact a PEGASUS AQUA MRET Dealer for servicing to ensure optimum performance.
Need help?
General
To Next Page