EasyManua.ls Logo

Peiying PY-GPS7014 - Calibrating Stylus Accuracy; Configuring GPS Path; USB Connection Modes; Device Specifications

Peiying PY-GPS7014
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Owner’s manual
34
EN
7.6 Stylus Accuracy Calibration
Select “Calibration” to adjust accuracy of touch pen. Follow the
instruction on the screen to carry out the calibration.
7.7 GPS Path
Select “Navi Path” to setup GPS Map and software path for
navigation. Copy the les to the internal ash memory or put
them on the SD card. Select the path and folder to nd the map
executive software (.exe) used, tap the le and tap “Navi Path”,
check it and conrm.
7.8 USB
Select “USB” to select di󰀨erent mode while device is being
connected to PC: Mass Storage or MS ActiveSync.
SPECIFICATION
CPU Mstar MSB2531 ARM Cortex-A7, 800 MHz
GPS Module Mstar MSR2112-LF
OS Windows CE 6.0
Display 7.0” 800 x 480 px TFT LCD; 16:9
Touch Screen Resistive
RAM 256 MB DDR2
Flash Memory 8 GB
GPS Antenna Built-in
Speaker Built-in
Earphone Jack 3,5 mm stereo
Extend Memory Micro SD card slot
PC Connectivity USB 2.0
Video format MP4, MPEG, MPG, AVI
Audio format MP3, WMA
Photo format JPEG, BMP
e-book format TXT
Battery Built-in 1200 mAh Li-Polymer Battery
Car charger Input: DC 12-24 V; Output: DC 5 V / 2 A
AC power charger Input: AC 110-240 V; Output: DC 5 V / 1,5 A
Operating temp. -10~60ºC