Need help?Do you have a question about the Pelco Endura and is the answer not in the manual?
Comprehensive list of all components included with the NVR5100 package.
Items the user must provide for installation and operation of the NVR5100.
Procedures for safely removing the NVR5100 from its packaging.
Steps for placing the NVR5100 on a flat surface, ensuring stability and clearance.
Detailed instructions for installing the NVR5100 into a standard 19-inch equipment rack.
Procedures for installing hard drive carriers and drives into the NVR5100 chassis.
Guide to connecting the NVR5100 to power sources, including dual redundant supplies.
Steps for connecting the NVR5100 to the Endura network via Gigabit Ethernet.
Explanation of the NVR5100's front panel buttons, indicators, and their functions.
Procedure for powering on and starting the NVR5100 unit.
Instructions for safely shutting down the NVR5100 unit, both orderly and immediate.
Common problems and suggested remedies for the NVR5100 unit.
Troubleshooting specific issues related to the NVR5100's power supplies and indicators.
Step-by-step guide for replacing a failed hard drive in the NVR5100.
Procedure for replacing a hot-swappable power supply unit without shutting down the NVR5100.
General| Form Factor | Rack-mountable |
|---|---|
| Supported Cameras | IP cameras |
| Maximum Cameras Supported | Up to thousands, depending on configuration |
| Video Compression | MJPEG |
| Storage Options | network-attached storage (NAS) |
| Operating System | Windows Server or Linux (depending on configuration) |
| Client Access | mobile app |
| Redundancy | Failover options available for recording servers and management servers |
To Next Page