Troubleshooting & FAQs
Q: Why don’t I see much smoke?
A: Even though the smoke may not be visible at times, it will still provide the smoke flavor on the
foods being cooked. As with all other pellet grills, the amount of visible smoke is light. If you
desire a larger amount of smoke and/or a smokier flavored food, we recommend using the Smoke
Daddy Cold Smoke Generator which produces a cold smoke and can be used with any wood fuels
of your choice.
Q: Controller is malfunctioning or is not maintaining my set temperature. What do I do?
A: Push the “Off” button in order for it to go into the shutdown cycle. Then, either quickly remove
the fuse or unplug the hopper assembly. This will reset the controller to factory settings. If
controller continues to malfunction, please contact your dealer.
Q: Why is there smoke coming from the hopper?
A: There is smoke coming from the hopper due to a slight burn-back with the pellets down the
auger tube. In order to solve this, set the controller to the “Smoke Setting” for approx. 15 min.
Afterwards, set the controller to the temperature you had originally desired. This occurs usually
when starting at a high temperature to low temperature too quickly.
Q: What if I want to attach the Pellet Pro® Controller to another pellet hopper?
A: The Pellet Pro® Controller is compatible with pellet grill brands such as Traeger, Camp Chef,
Char-Broil, and any other pellet hopper assembly that uses an auger, fan, RTD probe, and
electronic igniter. For Questions about compatibility, give us a call at 847-336-1329.
Q: What is the warranty?
A: We offer a 3 & 7 Year Limited Warranty. Warranty is included with packet.
Any Questions or Comments?
Email us at dennis@smokedaddyinc.com or call at 847-336-1329.
Visit our website at www.smokedaddyinc.com
Smoke Daddy Inc.
“Who’s Your Smoke Daddy?”
To Previous Page
Loading...