Do you have a question about the Pellini ScreenLine F Series and is the answer not in the manual?
Important safety instructions for people, including warnings about children, repairs, and battery handling, plus disposal guidelines.
Procedure to store a selected channel on the remote control by pressing specific buttons and waiting for LED confirmation.
Steps to cancel a specific channel by holding the battery module's central button and pressing remote control buttons.
Method to erase all previously stored channels by holding the battery module's central button until the LED stops flashing.
Instructions on how to activate the remote control by removing battery tabs and how to replace the CR2032 Lithium batteries.
| Motor voltage | 24 V DC |
|---|---|
| Input Voltage | 100-240 V AC, 50/60 Hz |
| Power Consumption | Maximum 30 W |
| Operating Temperature | 0°C to +50°C |
| Protection Rating | IP20 |
| Communication Interface | RS485 Modbus RTU |
Loading...