USER GUIDE
– Dect-Com Handset
1.1 POWER ON:
Press VOL+ and VOL– at the same time until LED
is switched on. If the handset is registered on a
base, the handset automatically connects to the
conference with the other handsets, and LED starts
to flash after approx. 10 seconds.
1.2 POWER OFF:
Press VOL+ and VOL– at the same time for at least
5 seconds. LED is switched off to indicate that the
handset is off.
1.3 VOLUME UP:
Press VOL+ (5 levels) to increase the volume.
When the maximum level is reached, you will
hear a short tone in the headset.
1.4 VOLUME DOWN:
Press VOL– (5 levels) briefly to decrease the
volume. When the minimum level is reached, you
will hear a short tone in the headset.
To Next Page
Loading...