Pentair Pool Products Kreepy Krauly Kruiser User Manual (English)

Questions and Answers:

M
Michael CoxJul 26, 2025
How to troubleshoot a sluggish Pentair Pool Products Swimming Pool Cleaner?
- O
  oortegaJul 27, 2025
  If your Pentair Pool Products Swimming Pool Cleaner is sluggish or has stopped operating, start by checking the cleaner for blockages inside the flapper chamber. Next, clean your filter system, and ensure both the pump and skimmer baskets are empty. Inspect the regulator valve, flushing away any debris buildup. Also, check the hose for blockages and leaks by lifting each section above water to listen for leaks. Finally, use your flow gauge to verify proper water flow to your cleaner.
N
Nicholas GonzalezAug 1, 2025
Why does my Pentair Pool Products Swimming Pool Cleaner stay on one side of the pool?
- P
  Phillip McdonaldAug 2, 2025
  To prevent your Pentair Pool Products Swimming Pool Cleaner from staying in one side of the pool, adjust the eyeball diverters. Also, verify the proper hose length and correct the position of the hose weights. If needed, remove or add one hose section to improve coverage.
A
Adam PriceAug 7, 2025
Why does my Pentair Pool Products Swimming Pool Cleaner travel in repetitive pattern?
- J
  Julia ChristensenAug 7, 2025
  To address a Pentair Pool Products Swimming Pool Cleaner that travels in a repetitive pattern, begin by adjusting the eyeball diverters. Next, verify the correct hose length and position of the hose weights. Place one hose weight 2 to 4 inches from the cleaner head. Check the hose for any bends or kinks by laying each section flat on your pool's deck to ensure it lies straight. Avoid coiling the hose when storing the cleaner, as this can cause kinks.
C
Cynthia TaylorAug 14, 2025
What to do if Pentair Pool Products Swimming Pool Cleaner does not transit onto the wall?
- M
  Michelle OlsonAug 14, 2025
  If your Pentair Pool Products Swimming Pool Cleaner isn't climbing the walls, verify proper water flow using your flow gauge and increase the water flow slightly if needed. Also, ensure the hose length is correct and the hose weights are properly positioned.
R
rodrigueztinaAug 19, 2025
How to stop Pentair Pool Products Swimming Pool Cleaner from getting stuck on steps?
- M
  Marc WelchAug 19, 2025
  If your Pentair Pool Products Swimming Pool Cleaner gets stuck on the steps, adjust the eyeball diverter of the return flow towards the problem area to guide the cleaner away from the steps. Verify the proper hose length and correct position of the hose weights. You might also consider purchasing an optional deflector wheel. Adjust the water flow to your cleaner within the recommended range, using your flow gauge.