Pentair AK110 - Service Screen Navigation

128
pH > 7.67-OFF 7.50s
ORP 490 -OFF 700s
_____
69.0f SW1OFFSW2OFF
Main Status Screen
Name:Main Pool
System
Programming
>Service
Data ( 8:441 )
Communications
Security Setup
Wizards
Serial # 123456
Configuration Menu, Service
AK110 Service Screen Navigation
Enter
Back
EnterBack
Press the [Enter] key once to turn the
three control relays off for 10 minutes.
Press the [Enter] key again to return to
normal control relay operation.
>All Off 10 min(NO)
Clear Calibrations
Clear Data
Clear RLY Timers
Service Screen, Relays Currently On
All Off 10 min(NO)
>
Clear Calibrations
Clear Data
Clear RLY Timers
Service Screen, Clear Calibrations
All Off 10 min(NO)
Clear Calibrations
>
Clear Data
Clear RLY Timers
Service Screen, Clear Data
All Off 10 min(NO)
Clear Calibrations
Clear Data
>
Clear RLY Timers
Service Screen, Clear Relay Timers
-Confirm Changes
-Clear RLY Timers
NO:7 9:YES
Clear Relay Timers Confirmation Screen
Press the [9] key reset all
relay timers or press the [7]
key to cancel.
Enter
9
7
or
-Confirm Changes
-Clear Data
NO:7 9:YES
Press the [9] key to clear the
accumulated data log or
press the [7] key to cancel.
Enter
9
7
or
-Confirm Changes
-Reset ALL
calibrations?
NO:7 9:YES
Clear Calibrations Confirmation Screen
Press the [9] key to clear
sensor calibrations or press
the [7] key to cancel.
Clear Data Confirmation Screen
>All Off 10 min(YES)
Clear Calibrations
Clear Data
Clear RLY Timers
Service Screen, Relays Off for 10 Min
Enter
9
7
or
AK110 Service Screen Navigation, Rev 3 21 Aug 2008
10.29