Pentair Autotrol 255 Logix 740-760 - Program system size; Time setting and winter time - summer time change

Installer Manual 255-LOGIX 740-760 - Programming
Ref. MKT-IM-001 / C - 08.10.2019 37 / 76
6.3.2. Program system size
Set your input system size and your resin volume in liters.
6.3.3. Time setting and winter time - summer time change
Set the current time.
A Use and to scroll though resin volume choices.
B Choose the nearest volume to your actual system size.
C To choose a 3-cycle filter operation, press until an "F" is
displayed.
D Press to validate the system size selected and advance to
the next parameter using or .
E If an incorrect setting is programmed, see “Resetting the
controller”, page 44.
A Press when the time of the day is displayed.
→ Time flashes.
B Adjust displayed time with and .
C Press to validate the selection and advance to the next
parameter using or .