Pentair Autotrol 255 Logix 740-760 - Day of week; Regeneration time; Days to regenerate (740 time-clock controller only)

Installer Manual 255-LOGIX 740-760 - Programming
38 / 76 Ref. MKT-IM-001 / C - 08.10.2019
6.3.4. Day of week
Set the current day of the week.
6.3.5. Regeneration time
Set the time when regeneration will take place.
6.3.6. Days to regenerate (740 time-clock controller only)
Set number of days between time-clock regeneration (regen frequency).
A Press .
→ Arrow flashes.
B Select displayed day with and .
C Press to validate the selection and advance to the next
parameter using or .
A Press .
→ Regeneration time flashes.
B Adjust displayed time with and .
C Default setting: 2:00am.
D Press to validate the selection and advance to the next
parameter using or .
A Press .
→ Number of days flashes.
B Adjust displayed number with and .
→ Default number: 3 days.
→ Days can be adjusted from ½ (0.5) to 99 days.
C Press to validate the selection and advance to the next
parameter using or .