Pentair Autotrol 255 Logix 740-760 - Page 69

Installer Manual 255-LOGIX 740-760 - Spare parts
Ref. MKT-IM-001 / C - 08.10.2019 69 / 76
* Not shown
17 - Drain control assembly with o-ring 1
* 1000208 N°6 1
* 1000209 No.7 (1.2 gpm; 4.5 Lpm) 1
* 1000210 No.8 (1.6 gpm; 6.1 Lpm) 1
* 1000211 No.9 (2.0 gpm; 7.6 Lpm) 1
* 1000212 No.10 (2.5 gpm; 9.5 Lpm) 1
* 1000213 No.12 (3.5 gpm; 13.2 Lpm) 1
* 1000214 No.13 (4.1 gpm; 15.5 Lpm) no ball 1
* 1000215 No.14 (4.8 gpm; 18.2 Lpm) no ball 1
18A 1243510 Brine refill controller,.33 gpm, no ball 1
19 - Air check kit 1
* 1032416 Air check kit 3/8" male 1
* 1032417 Air check kit 1/4" male (Std) 1
20 1235373 Module, sensor, photo interrupter 1
21 1238861
Motor with spacer pinion, cable, 700 series controller, 12V, 50/
60 Hz
1
* 3029962 Motor locking pin (white) 1
22 1030502 Ball, flow control internal up to no.12 inclusive 1
* 1033066 New to old style air check adapter 1
* 1244336 Chlorine generator kit, 0.33 gpm 1
* 1266065 Cord, long, chlorine generator 1
* 1242411
Extension cord 50 cm for cabinets (motor, opt. sens., turbine
wires)
1
* 1235446 Turbine cable, Logix, short 1
* 1239711 Switch kit, front mount, 0.1 amp 1
* 1239752 Switch kit, front mount, 5 amp 1
* 1239753 Switch kit, top plate mount, 0.1 amp 1
Item Part number Description
Assembly
quantity