Installer Manual Magnum 742-762 - Installation
42 / 106 Ref. MKT-IM-012 / C - 25.10.2019
5.6. Connections (electrical)
5.7. Bypassing
A bypass valve system should be installed on all water conditioning systems. Bypass valves isolate the
softener from the water system and allow unconditioned water to be used. Service or routine
maintenance procedures may also require that the system is bypassed.
Chlorine generator outlet
(EU versions only)
AC transformer input (low voltage)
Lockout connection (764 only)
Main motor & optical sensor
connection
Sensor input for turbine 760/762
Dry contact signal input 740/742
Secondary valve motor control (764 only)
Normal operation In Bypass
Out OutIn In
To Next Page
Loading...
