Pentair AUTOTROL MAGNUM 742 - Basic Programming Mode Chart 742 F-762 F;293 Valve Type

Installer Manual Magnum 742-762 - Programming
Ref. MKT-IM-012 / C - 25.10.2019 49 / 106
6.3.2. Basic programming mode chart 742F-762F/293 valve type
Parameter description Range of values
Default
value
Units of
measure
Notes
Program valve type
255, 263, 268,
278 and
Magnum series
None N/A -
Program system size 5 - 100 / F None liters -
Time setting
1:00 - 12:59 AM
0:00 - 23:59 PM
12:00 PM
hour:
minute
-
Day of week N/A None N/A -
Time of backwash
1:00 - 12:59 AM
0:00 - 23:59 PM
12:00 PM
hour:
minute
Dependent of time setting (AM
or PM).
Days override
(762F controller only)
0.5 - 99 0 day
0 = no days override.
0.5 = regeneration twice a day
at time of regeneration and
12 hours later.
Days between
regeneration
(742F controller only)
0.5 - 99 0 day
0 = no days between
regeneration.
0.5 = regeneration twice a day
at time of regeneration and
12 hours later.
Backwash length 0 - 200 14 minute -