Pentair AUTOTROL MAGNUM 742 - Basic Programming 742 - 762;298 Valve Type

Installer Manual Magnum 742-762 - Programming
50 / 106 Ref. MKT-IM-012 / C - 25.10.2019
6.3.3. Basic programming 742 - 762/298 valve type
6.3.3.1 Program valve type
Set your valve type through the options.
6.3.3.2 Program system size
Set your input system size and your resin volume in litres.
6.3.3.3 Time setting
Set the current time.
A Use and to scroll though valve type choices.
→ Valve type flashes.
B Choose the 298 valve type.
C Press to validate the valve type selected and advance to
the next parameter using or .
A Use and to scroll though resin volume choices.
→ Three dashes than resin volume flashes.
B Choose the nearest volume to your actual system size.
C Press to validate the system size selected and advance to
the next parameter using or .
D If an incorrect setting is programmed, see “Resetting the
controller”, page 61.
A Press .
→ Time flashes.
B Adjust displayed time with and .
C Press to validate the selection and advance to the next
parameter using or .