Installer Manual Magnum 742-762 - Generalities
6 / 106 Ref. MKT-IM-012 / C - 25.10.2019
1. Generalities
1.1. Scope of the documentation
The documentation provides the necessary information for appropriate use of the product. It informs
the user to ensure efficient execution of the installation, operation or maintenance procedures.
The content of this document is based on the information available at the time of publication. The
original version of the document was written in English.
For safety and environmental protection reasons, the safety instructions given in this documentation
must be strictly followed.
This manual is a reference and will not include every system installation situation. The person
installing this equipment should have:
• training in the 700 Logix series controllers and water softener installation;
• knowledge of water conditioning and how to determine proper controller settings;
• basic plumbing skills.
This document is available in other languages on https://www.pentairaquaeurope.com/product-
finder/product-type/control-valves.
1.2. Release management
1.3. Manufacturer identifier, product
Manufacturer: Pentair International LLC
Avenue de Sevelin 18
1004 Lausanne
Switzerland
Product: Magnum 742-762
Revision Date Authors Description
A 02.08.2017 STF/ESA First edition.
B 23.05.2018 BRY/FLA
Address change, Bleam information and valve on
tank assembly.
C 25.10.2019 STF General corrections.
To Next Page
Loading...
