Pentair AUTOTROL MAGNUM 742 - Abbreviations Used; Norms; Applicable Norms; Available Certificates

Installer Manual Magnum 742-762 - Generalities
Ref. MKT-IM-012 / C - 25.10.2019 7 / 106
1.4. Abbreviations used
BLFC ................................................................................. Brine Line Flow Controller
DF...................................................................................... Down Flow
DLFC ................................................................................. Drain Line Flow Controller
Inj ...................................................................................... Injector
QC...................................................................................... Quick Connect
Regen ................................................................................ Regeneration
SBV.................................................................................... Safety Brine Valve
TC ...................................................................................... Time Clock
UF...................................................................................... Up Flow
1.5. Norms
1.5.1. Applicable norms
Comply with the following guidelines:
• 2006/42/EC: Machinery Directive
• 2014/35/UE: Low Voltage Directive;
• 2014/30/UE: Electromagnetic compatibility;
• 2011/65/EC: Restriction of use of certain hazardous substances in electrical and electronic
equipment (RoHS);
• UNI EN ISO9001.
Meets the following technical standards:
• IEC/EN 60335-1
• IEC 61010-1
• EN 55014-1
• EN 55014-2
• EN 61000-3-2: 2006 + A1: 2009 + A2: 2009
• EN 61000-3-3: 2008
• EN 61000-6-2: 2005
• EN 61000-6-3: 2007 + A1: 2011
• EN 61326-1
1.5.2. Available certificates
•CE
•DM174
•ACS
Please find beside the certifications for
some of our product families. Please
note that this list is not an exhaustive list
of all our certifications. In case of need
for more information please contact us.