Pentair COLORCASCADE - 2 Using an External Transformer for Multiple ColorCascade Lights; Maximum wattage when using multiple ColorCascade and IntelliBrite Color LED lights (using a 300 Watt Transformer)

COLORCASCADE
®
Color Pool and Spa Light Installation and User’s Guide COLORCASCADE
®
Color Pool and Spa Light Installation and User’s Guide
2
Using an External Transformer for Multiple ColorCascade
®
Lights
When using multiple ColorCascade 12 VAC lights on a 100 Watt transformer, it is
recommended that no more than four (4) ColorCascade lights be used. It is also
recommended not to exceed 100 feet of total cable run between the transformer and lights.
Note: For long cable lengths, set transformer to 14 VAC, and use only ColorCascade lights
with the 150” cord option, see diagram below.
Note: If a longer cable
run is necessary, it is
recommended that
separate 100 Watt 12 VAC
transformers be used for
each light with no more
than 100 feet of total
cable run between the
transformer and lights.
Maximum wattage when using multiple ColorCascade and
IntelliBrite
®
Color LED lights (using a 300 Watt Transformer)
IMPORTANT! When using multiple 12 VAC ColorCascade Light, IntelliBrite Light and
IntelliBrite Landscape Lights, the total allowable light wattage is 300 Watts maximum. The
ColorCascade and IntelliBrite light wattages are as follows:
• OneColorCascadelightis16Wattsmaximum
• OneGloBrite
®
Light is 23 Watts maximum
• OneIntelliBritePoolLightis30Wattsmaximum
• OneIntelliBriteSpaLightis18Wattsmaximum
• OneIntelliBriteLandscapelightis15Wattsmaximum
• OneMagicStream
®
Laminar is 16 Watts maximum
J Box
12 Gauge
(Minimum)
100 ft.
100 Watt
Transformer