Pentair EASYTOUCH PL4 - IntelliChlor Salt Chlorine Generator Diagnostics; IntelliChlor SCG Status and Error Resolution

EASYTOUCH
®
PL4/PSL4 Control System Installation Guide
EASYTOUCH
®
PL4/PSL4 Control System Installation
23
MountandCabletheEasyTouch
®
PL4/PSL4 Control System
Indoor Control Panel
To mount and connect the communication cable to the EasyTouch PL4/PSL4 Control System Indoor
Control Panel:
1. Route the cable through the house wall to the location of the indoor control panel. Pull a
working length of the communication cable out of the wall.
2. Removethecontrolpanelfrontcoverfromthebackplate: Unsnap the bottom edge of
the front of the control panel cover from the back plate.
Front cover
Back plate
Mountinghole
Hole in house wall for
communication cable
Mountinghole
Unsnap from here to
remove front cover
EasyTouch PL4/PSL4 Control System Indoor Control Panel