Pentair FLECK 2850 SXT - Hours Since Last Regeneration (HR); Volume Since Last Regeneration (VU); Reserve Capacity (RC)

Installer manual Fleck 2850 SXT - Programming
62 / 104 Ref. MKT-IM-030 / C - 12.05.2020
1. Peak flow rate display:
6.7.4 Hours since last regeneration (HR)
Info
Shows the number of hours since the last regeneration, indicating the length of the
current service cycle.
1. Hours since last regeneration display:
6.7.5 Volume since last regeneration (VU)
Info
Shows the volume used since the last regeneration (L).
1. Volume since last regeneration display (L or Gal depending on display
format programmed):
6.7.6 Reserve capacity (RC)
Info
Shows the remaining reserve volume until next regeneration (L).
1. Volume until next regeneration display (L or Gal depending on display
format programmed):