Pentair FLECK 2850 SXT - Controller Replacement

Installer manual Fleck 2850 SXT - Maintenance
76 / 104 Ref. MKT-IM-030 / C - 12.05.2020
9.4.3 Controller replacement
1. Using a flat screwdriver, unscrew (2) and open the cover (1).
2. Open the controller (3).
3. Press on the clips (5) and remove the controller cover (4).
4. Disconnect the controller (7).
5. Press on the clips (6) and remove the controller (7).
6. Connect the new SXT controller (7), see Electrical connections [
→
Page45].
7. Reverse above procedure steps to rebuild.