Pentair FLECK 5600 SXT - Microswitches And;Or Drive Cam Replacement

Installer manual Fleck 5600 SXT - Maintenance
82 / 104 Ref. MKT-IM-013 / E - 23.09.2020
9.4.5 Microswitches and/or drive cam replacement
1. Using a Philips screwdriver, unscrew(1) and remove the cover(2).
2. Disconnect the wire on the microswitches(6).
3. Using a Philips screwdriver, unscrew(8).
4. Remove the protection plate(7) and the micorswitches(6).
5. Using a Philips screwdriver, unscrew(5) and remove the drive cam(4) and the washer(3).
6. Change the drive cam(4) and/or the microswitches(6).
7. Reverse above procedure steps to rebuild.