Pentair FLECK 5600 SXT - Available Certificates; Procedure for Technical Support; Copyright and Trademarks

Installer manual Fleck 5600 SXT - Generalities
Ref. MKT-IM-013 / E - 23.09.2020 9 / 104
Meets the following technical standards:
• EN 55014-1;
• EN 55014-2;
• EN 61000-6-1;
• EN 61000-6-2;
• EN 61000-6-3;
• EN 61000-6-4;
• EN 61010-1;
• EN 61000-3-2;
• EN 61000-3-3.
1.6.2 Available certificates
• CE;
• DM174;
• ACS.
Please find beside the certifications for some of our
product families. Please note that this list is not an
exhaustive list of all our certifications. In case of need
for more information please contact us.
1.7 Procedure for technical support
Procedure to follow for any technical support request:
1. Collect the required information for a technical assistance request.
ð Product identification (see Serial label location [
→
Page13] and Recommendations
[
→
Page77]);
ð Description of the device problem.
2. Please refer to the Troubleshooting [
→
Page87]. If the problem persists contact your
supplier.
1.8 Copyright and Trademarks
All indicated Pentair trademarks and logos are property of Pentair. Third party registered and
unregistered trademarks and logos are the property of their respective owners.
© 2020 Pentair. All rights reserved.