Pentair FLECK 5800 SXT - Regeneration Time (RT); Feed Water Hardness (H); Reserve Capacity (RC) or (SF); Current Day of the Week (CD)

Installer Manual Fleck 5800 - SXT - Programming
48 / 92 Ref. MKT-IM-004 / A - 18.04.2017
6.4.2. Regeneration time (RT)
Determine the time of regeneration.
6.4.3. Feed Water Hardness (H)
Determine the feed water hardness in °tH.
6.4.4. Reserve capacity (RC) or (SF)
Determine the reserve capacity in litre or in percentage.
6.4.5. Current day of the week (CD)
Determine the day of regeneration.
Note
Appears only if the softener is set to "weekly time clock".
Note
1 for Monday, 2 for Tuesday, 3 for Wednesday, 4 for Thursday, 5 for Friday, 6 for Saturday
and 7 for Sunday.
D Adjust the regeneration time with and .
E Press to validate the selection and advance to the next parameter.
F Adjust the water hardness with and .
G Press to validate the selection and advance to the next parameter.
H Adjust the reserve capacity with and .
I Press to validate the selection and advance to the next parameter.
J Adjust the day of the week with and .
K Press to validate the selection and exit the basic programming mode.