Installer Manual Fleck 5800 - SXT - Commissioning
66 / 92 Ref. MKT-IM-004 / A - 18.04.2017
Brine tank softeners
Backwash the softener and add the required amount of hypochlorite to the well of the brine tank. The
brine tank should have water in it to permit the chlorine solution to be carried into the softener.
Proceed with the normal regeneration.
7.2.3. Electro chlorination
Valves or systems already equipped with an electrochlorinator device or system will be sanitized
during the brine draw phase.
To Next Page
Loading...
