Pentair Fleck 5800 XTR - Page 62

Installer Manual Fleck 5800 - XTR - Programming
62 / 122 Ref. MKT-IM-006 / B - 16.01.2018
Screen name Parameters Values Notes
Format,
Format
Language
English
French
German
Italian
Spanish
Dutch
Portuguese
Changes the language to display screen text
and button labels.
Units
U.S.
Metric
Changes system units and values across all
parameters in the control.
All programmed units and values are
recalculated after adjusting this setting.
Hardness
units
Grain per gallon
mg/L or ppm
German degrees
French degrees
English degrees
Changes hardness units used in displaying
hardness parameters and calculating system
capacity and editing exchange capacity and
hardness settings.
Format,
Assistance
name
Free-form
text
A - Z and space
Name of service provider to display when
viewing the assistance screen. 24 character
limit.
Format,
Assistance
phone
Free-form
text
0 - 9 and space
Phone number of service provider to display
when viewing the assistance screen. 
14 character limit.
Format,
Assistance
interval
Interval
Month based: 1 - 60
Regen based: 5 - 2000
OFF
Set to automatically display the assistance
screen after a certain number of months or
regenerations.
Valve
System 4
Type 4 (single system) is currently the only
available selection.
Valve
5800
5810
5812
Select the type of valve to be installed.
Regen type
Time clock
Softener immediate
Softener delayed
Filter immediate
Filter delayed
Regeneration types are described in detail on
page 61.
Additional Valve screen parameters are
dependent upon selected regeneration type.
Not all parameters will be displayed.
Softener delayed regeneration type has four
reserve options (fixed %, fixed volume,
variable reserve, weekly reserve). The control
will display additional configuration options
depending on the selected reserve type.