Pentair Fleck 5800 XTR - Page 80

Installer Manual Fleck 5800 - XTR - Programming
80 / 122 Ref. MKT-IM-006 / B - 16.01.2018
6.4.5.1 Alarm Based
salt alarm: Turns the relay ON in case of salt alarm.
Mandatory
On the valves of series 5800, salt alarm must be set OFF because the chlorine cell kit
managed by the XTR is not available for those valves.
valve failure: Turns the relay ON if the valve has a failure.
need service/mainten. req’d: Turns the relay ON when the interval between services is reached.
Press to save and to pass to the second relay settings screen if present, or press to return to
the master settings screen without saving.
If already in second relay, or if second relay has not been activated, press to save and to return to
the master settings screen or press to return to the master settings screen without saving.
6.4.5.2 Cycle Based
Aux. #: Alarm Based
need service/
mainten. req’d
valve failure
off
on
salt alarm
off
Aux. #: Cycle Based
rapid rinse
backwash
off
off
on
treatment