Installer manual Fleck 9100 SXT - Installation
38 / 108 Ref. MKT-IM-004 / E - 06.10.2020
5.7 Regeneration flows
Metered
The controller monitors the volume of water used. Once it calculates that there is not enough
capacity for the next operation day, a regeneration cycle will be initiated immediately or at a pre-
set time:
• immediate control: the controller measures water usage and regenerates the system as
soon as the system capacity is reached;
• delayed control: the controller measures water usage and if the capacity is not reached until
the number of days override, it regenerates the system, at the specified regeneration time.
To Next Page
Loading...
