Pentair FLECK 9100 SXT - Current Day (CD); Flow Meter Type (FM); Meter Pulse (K)

Installer manual Fleck 9100 SXT - Programming
Ref. MKT-IM-004 / E - 06.10.2020 55 / 108
6.5.16 Current day (CD)
Set the current day.
Info
The current day is defined from D1(Monday) to D7(Sunday).
1. Press or to set the current day.
2. Press to validate the selection and move to the next parameter.
6.5.17 Flow meter type (FM)
Select the flow meter type.
Options:
• P0.7: ¾" paddle wheel meter (Standard setting for 4600, 5600 and 9100);
• t0.7: ¾" turbine meter;
• P1.0: 1" paddle wheel meter (Standard setting for 2750 and 9000);
• t1.0: 1" turbine meter;
• P1.5: 1½" paddle wheel meter (Standard setting for 2850);
• t1.5: 1½" turbine meter;
• P2.0: 2" paddle wheel meter;
• Gen: generic or other non-Fleck meter.
1. Press or to set the flow meter type.
2. Press to validate the selection and move to the next parameter or exit
master programming mode and save modifications done.
6.5.18 Meter pulse (K)
Set the meter pulse for a non-standard flow meter.
Info
The meter pulse parameter is only available if the Gen option has been set in flow
meter type selection.
1. Press or to set the meter constant in pulses per unit of volume.
2. Press to validate the selection and to exit the master programming
mode.