Pentair FLECK 9100 SXT - Operation; Display; Display During Operation; Display During Regeneration

Installer manual Fleck 9100 SXT - Operation
62 / 108 Ref. MKT-IM-004 / E - 06.10.2020
8 Operation
8.1 Display
8.1.1 Display during operation
Examples:
• Valve in service with day time:
• Valve in service with volume remaining before regeneration:
• Remaining days before next regeneration:
• In volumetric regeneration flow, reserve 1223litres remaining:
• In volumetric regeneration flow, exhausted reserve, immediate or
delayed start in regeneration depending on the adjustment:
• Tank in service:
Info
In delayed volumetric mode, the icon flashes as soon as the reserve begins to be
used.
8.1.2 Display during regeneration
During a regeneration the display shows the current cycle step and the time remaining for that
cycle. The countdown for the time remaining starts only when the valve is in the cycle displayed.
Examples:
• Valve going to rapid rinse. RR are flashing:
• Refill cycle, 12min 38sec. left:
• Rapid rinse cycle, 2min 17sec. left: