Installer Manual Foleo - Programming
42 / 112 Ref. MKT-IM-038 / C - 15.11.2019
5.2. Quick program guide
NOTE
Some items may not be shown depending on controller configuration.
NOTE
The controller will discard any changes and exit master settings if any button is not pressed
for five minutes.
26. Accept → Press to save or accept changes in controller configuration.
27. Cancel → Press to cancel configuration and exit to previous screen
without saving.
Screen name Parameters Values Notes
Format,
Format
Language
English
French
German
Italian
Spanish
Dutch
Portuguese
Changes the language to display screen text
and button labels.
Units Metric
All programmed units and values are
recalculated after adjusting this setting.
Hardness
units
mg/L or ppm
German degrees
French degrees
Clark degrees
Changes hardness units used in displaying
hardness parameters and calculating system
capacity and editing exchange capacity and
hardness settings.
Format,
Assistance
name
Free-form
text
A - Z and space
Name of service provider to display when
viewing the assistance screen. 24 character
limit.
Format,
Assistance
phone
Free-form
text
0 - 9 and space
Phone number of service provider to display
when viewing the assistance screen.
14 character limit.
Format,
Assistance
interval
Interval
Month based: 1 - 60
Regen based: 5 - 2000
Off
Set to automatically display the assistance
screen after a certain number of months or
regenerations.
To Next Page
Loading...
