Installer Manual Foleo - Programming
58 / 112 Ref. MKT-IM-038 / C - 15.11.2019
Press to save and pass to the next step or press to return to the regeneration screen without
saving.
5.4.4.1 Cycle times and water consumption
* for a 100% regeneration.
** choose salt dosage upon inlet hardness level and required capacity.
Softener Foleo 10 Foleo 15
Salt dosage (g/L
resin
)**
80 100 120 160 200 80 100 120 160 200
Water to dissolve the
required salt quantity [L]
2.24 2.80 3.36 4.48 5.60 3.36 4.20 5.04 6.72 8.40
Brine to draw [L] 2.52 3.15 3.78 5.04 6.30 3.78 4.73 5.67 7.56 9.45
Refill* 5 6 8 10 12 8 9 11 15 18
Pause 120 120
Brine draw* 7 8 10 13 16 10 12 15 19 24
Slow rinse 37 55
Backwash 4 5
Rapid rinse 4 5
Water consumption per
regen [L]*
62.9 63.9 66.0 68.6 71.2 85.0 86.5 89.1 93.2 97.4
Softener Foleo 20 Foleo 30
Salt dosage (g/L
resin
)**
80 100 120 160 200 80 100 120 160 200
Water to dissolve the
required salt quantity [L]
4.48 5.60 6.72 8.96 11.20 6.27 7.84 9.41 12.55 15.69
Brine to draw [L] 5.04 6.30 7.56 10.08 12.60 7.06 8.82 10.59 14.12 17.65
Refill* 10 9 10 13 17 10 12 14 19 23
Pause 120 120
Brine draw* 9 11 13 17 22 12 15 18 24 30
Slow rinse 37 51
Backwash 4 4 6
Rapid rinse 4 4 6
Water consumption per
regen [L]*
118.9 119.6 122.5 129.0 137.3 167.1 171.8 176.5 186.6 196.0
To Next Page
Loading...
