Installer Manual Foleo - Programming
Ref. MKT-IM-038 / C - 15.11.2019 59 / 112
5.4.5. Relay output screen
From the master settings screen press the relay button to display the relay output screen.
Press to save and to return to the master settings screen or press to return to the master
settings screen without saving.
auxiliary 1/auxiliary 2: Set to off.
5.4.6. Meter screen
From the master settings screen press the meter button to display the meter screen.
meter type: Set to 0.75" turbine.
emerg. regen.: set to off, this option would create an immediate regeneration as the capacity is
depleted and exceeded by 50%.
Press to save and to go to the continuous flow detect screen or press to return to the master
settings screen without saving.
Relay Output
auxiliary 1
off
auxiliary 2 off
Meter
generic
emerg.
regen
na
off
meter type
0.75 turbine
To Next Page
Loading...
