Installer Manual Foleo - Programming
60 / 112 Ref. MKT-IM-038 / C - 15.11.2019
continuous flow detect: Set to on. Triggers an alarm when continuous flow smaller than 0.5 gpm or
1 Lpm is detected by the flow meter over a 8 hours period.
Press to save and to return to the master settings screen or press to return to the master
settings screen without saving.
5.4.7. Settings review
From the master settings screen press the settings review button to display the settings review
screen, which display a read-only summary of all programmed settings in the controller.
Use the navigation arrows at the top of the screen to scroll through the parameters currently set in
the controller. The settings review screens are formatted similarly to the corresponding screen
where each parameter was set.
Press to return to master settings.
Continuous Flow Detect
flow rate
continuous
flow detect
1.0
Lpm
8 hduration
on
Format
units
hardness units
english
metric
mg/L
language
To Next Page
Loading...
