Pentair HAFFMANS i-DGM - Page 76

HAFFMANS c-DGM/i-DGM
Page 76 of 78 c-DGM/i-DGM
Grease for O-rings 000.839
Accessories
Power supply c-DGM & i-DGM IP67 with mains plug type EURO 101.033
Power supply c-DGM & i-DGM IP67 with mains plug type GB 101.034
Power supply c-DGM & i-DGM IP67 with mains plug type USA 101.035
Power supply c-DGM & i-DGM IP67 with mains plug type Australia 101.036
Quick charger c-DGM & i-DGM IP67 with mains plug type EURO 101.063
Quick charger c-DGM & i-DGM IP67 with mains plug type GB 101.064
Quick charger c-DGM & i-DGM IP67 with mains plug type USA 101.065
Quick charger c-DGM & i-DGM IP67 with mains plug type Australia 101.066
Set, high-pressure hoses 6 x 12 mm (standard) 100.110
Set high-pressure hoses 6 x 12 mm with metal couplings (optional) 101.008
Set, hoses 6.4 x 11.1 mm (optional) 100.004
Software set 101.007
CD-ROM with PC communication program “DGM utility”
RS-232 cable (1.5 metre)
RS-232 adapter 9 pin male / 25 pin female
Haffmans verification and calibration unit, type GCD (optional) 006.264
Contents of service set
Socket screw key 2x100 004.086
Socket screw key 2.5x100 005.209
Socket screw key 3x100 004.085
Socket screw key 4x100 004.084
Puller for O-rings 004.080
Brush 004.059
Calibration bolt (hollow) 101.067
03 Screw M6x8 for calibration connection 100.127
04 O-ring for screw M6x8 100.048
Grease for O-rings
Cloth 004.081
Set, O-rings, i-DGM / c-DGM