Pentair HYPRO 9343 Series - Product Identification and Safe Usage; Misuses; Pump Identification

Misuses
Hyprocentrifugalpumpsaredesignedtooperateeffectivelywithinthespeciedspeed,pressureandenvironmental
ranges.Goingoutsideoftheserangeswillvoidthewarrantyandcouldcausedamagetoproperty,seriousinjury,ordeath.
• DO NOTrunthepumpfasterthanthemaximumspeciedspeed.
• DO NOTrunthepumphigherthanthemaximumspeciedpressure.
• DO NOT run pumps when the liquid has exceeded the maximum or minimum temperature limit (see Intended Uses).
• DO NOT pump non-approved liquids.
• DO NOT pump water or other liquids for human consumption.
• DO NOToperateanyHypropumpundertheinuenceofdrugsoralcohol.
• DO NOT run the pump dry.
• DO NOT run the pump with a higher than recommended voltage.
• DO NOTrunthepumphydraulicmotorhigherthanthespeciedRPM,pressureorow.
• DO NOT use pumps in an explosive environment.
• DO NOTattachapipe,hoseorttingtothepumpthatisnotratedforthemaximumpressureofthepump(outlet)or
vacuum of the pump (inlet).
• DO NOT run the pump in reverse of its intended rotation.
• DO NOT operate a pump with a gasoline engine in an enclosed area.
Pump Identication
Hypro uses serialized labeling to enable users to precisely identify the pump’s manufacturing date.
Serial Number:
First and second digits: year (14 = 2014)
Third through fth digits: consecutive day of the year the pump was manufactured.
Sixth through tenth digits: unique pump serial number.
5
L-1581 Rev. A (10/18)